SALTUS™ Composite poles for Electrical Distribution
Telecoms & Street light distribution
The SALTUS™ Composite Pole has been developed in co-operation with the industry since 2012. The internationally patented design guarantees the BEST VALUE composite utility pole in the world.
CARBON FIBRE DESIGN, manufacturer of WORLD CLASS QUALITY carbon fibre and glass fibre poles, introduces the REVOLUTIONARY and worldwide patented COMPOSITE SUPPORT POLE.
Why consider SALTUS™ Composite Poles?
The internationally patented design aims at low cost to compete with the price of wood and addresses the following problems of wood and concrete poles:
BENEFITS of the SALTUS™ Composite Pole:
LOWEST LOGISTICS COST
SALTUS™ Poles nest for transport and is LIGHT WEIGHT, therefore the transport is usually volume limited and not weight limited as with concrete or timber
SUPERIOR TEMPERATURE PERFORMANCE
SALTUS™ Poles performs well in hot and cold environments. The established temperature range is -60°C to +75°C
FLAME RESISTANT
SALTUS™ Poles has SUPERIOR FLAME RESISTANCE due to its unique advanced flame resistant composite properties. The special flame resistant resin is well known for its flame resistant properties and is often used for this reason in the aerospace composite industry
LONGEST LIFE
With a 60 years ENGINEERED service life and integrated UV protection. No scheduled maintenance is required resulting in lowest lifecycle cost and immunity to rot, corrosion, woodpeckers and termites
LOWEST LIABILITY
With a limited 30 year warranty, high dielectric strength providing IMPROVED SAFETY for workers and the public, better storm and higher wind reliability and minimum environmental impact
HARDWARE COMPATIBILITY
Smooth surfaced hardware without sharp edges should be used with SALTUS™ Poles. Hardware for round cross-sectioned steel and concrete poles is commonly available and can be used with SALTUS™ Poles
FAST INSTALLATION
SALTUS™ Poles are LIGHT WEIGHT and therefore installation requires LESS LABOUR and will typically be installed at triple the speed compared to concrete or timber poles. We have now got solid proof of this for the Telecoms industry. This contributes to its competitive initial installation cost compared with alternatives
SALTUS™ Composite Pole Flame Resistance
Will SALTUS™ Composite Support Poles survive a fire?
The flame resistant composite layer on the outside can survive a gas flame burning for 5 minutes without creating any smoke. The composite layer on the outside also protects the inner plastic layer and conducts heat away from the plastic layer.
After flame test of five minutes at 1500°C – no mechanical degradation to fiberglass layer or inner plastic pipe
LOWER TRANSPORT COSTS
FASTER INSTALLATION
LABOUR SAVING
TYPICAL MYTHS RELATED TO FIBREGLASS SUPPORT POLES:
Fibreglass poles whip around in the wind
Each vineyard support pole is engineered to withstand a wind load of 365 Pascal which is an internationally accepted design standard for fibreglass luminaires and road signs. This allows for deflection of the pole up to 5% of its length in strong winds.
Fibreglass poles leach chemicals into the ground over time
Each SALTUS™ pole is engineered for a service life of 60 years (with a limited warranty of 30 years) and the resin which holds the fibres together will not degrade or leach into the ground.
Fibreglass poles cannot support big headloads
Each SALTUS™ pole is individually engineered by factoring in wind load and exposed area and support load. Also refer to 40 ton support for mining industry.
Fibreglass poles are deteriorated by sunlight
The UV rays of sunlight will only damage unprotected fibreglass. The SALTUS™ support pole is protected by an imbedded layer of UV protection which cannot be scratched or flaked off. No maintenance is required.
Fibreglass poles are made out of plastic
Only the inner shell is made of plastic and is used for its elastic properties to extend the lifetime of the pole. The support is mainly provided by the fibreglass outer shell which consists of 70% fibreglass and 30% resin.
The SALTUS™ Composite Street Light Poles
Relevant pole data is based on a shape factor of 0.7 and a calculated wind pressure of 500 Pa.
Corresponding calculated key values are based on a luminaire surface area of 0.2 m2 with a shapefactor of 1.
Call us and we will help choose the correct pole for your specific application.
The SALTUS™ Electrical & Telecom Poles
Relevant pole data is based on a shape factor of 0.7 and a calculated wind pressure of 365-700 Pa depending on application
Please call us and we will help choose the correct pole for your specific application.
With SALTUS™ Composite Poles you will prevent the following problems experienced with timber:
Truckload Quantity Comparison
Give us a call and we will help choose the correct pole for your specific application.
SALTUS™ Composite Pole
Easy Installation
Call us and we will help choose the correct pole for your specific application.
Lower overall installation cost
No crane needed – three people installing a 9m pole easily
Faster installation
For those difficult to reach places
Lower transport cost
Please call us and we will help choose the correct pole for your specific application.
The SALTUS™ Range of Poles
Call us and we will help choose the correct pole for your specific application.
The SALTUS™ Composite Pole Quality Control
QUALITY CONTROL BEND TESTING ACCORDING TO INTERNATIONAL STANDARDS
Street light poles – BEKA specs
Telecoms and electrical distribubon poles – SABS, ACMA standards and ASCE guidelines
ASCE – Recommended practice for FRP products overhead utility line structures
ACMA - Standard Specificabon for FRP Composite ublity Poles - supported by ANSI
SALTUS™ Poles Applications
The poles can be recycled and used in other applications after its service life of 60 years
Inner plastic tube recycle
The plastic inner layer can be recycled via the standard plastic recycle route. This is a closed loop cycle and no plastic is wasted.
Chopped fibre filler for green plastic wood products
Each SALTUS™ pole has a fibreglass outer layer. This layer can be chopped into short fibres and the fibres can be mixed into green plastic wood products. It has been shown that extruded plastic profiles can be strengthened using up to 40% (by volume) chopped fibre.
Chopped fibre filler for geopolymers or concrete
Each SALTUS™ pole has a fibreglass outer layer. This layer can be chopped into short fibres and the fibres can be mixed into geopolymer or concrete. It has been shown that geopolymer and concrete can be strengthened using up to 40% (by volume) chopped fibre.
